Brooks offers an extensive line of construction cleaning services. Below, you will find a general list of the specifications we use for rough cleans. Respectively, every project is different and we accomodate the needs of our client accordingly. If a rough clean is requested by the builder, it shall include but not be limited to the following.
- Remove any and all trash, dirt, and debris from the exterior of the unit and dispose of as directed by the Contractor's Superintendent.
- Clean all tubs, toilets, lavatories, kitchen sinks and appliances. Remove any and all temporary protection and labels not required to remain.
- Clean out all kitchen cabinets and vanity cabinets. Clean all kitchen countertops and vanity tops.
- Scrape and wash the inside and outside surfaces of all windows and sliding glass doors. Do not scrape windows or scratch frames.
- Clean all windows and sliding glass door frames, sills, and tracks. Vacuum tracks as required, giving special attention to windows and tracks above stairways.
- Clean all utility closets, furnace closets, storage areas, garages, etc.
- Clean all water heaters.
- Clean water valve box (washing machine/dryer area).
|
The final clean prepares for the initial inspection by the Owner, such that the owner could, if he so desired, take possession of, and occupy the unit upon completion of this initial inspection. Brooks offers complete construction cleaning services. The following is a general checklist of our final clean specifications. Please note, we recognize each project is unique and may require alterations or deviations from this list.
- Remove any and all trash, dirt, and debris from the interior of the unit and dispose of as directed by the Contractor's Superintendent.
- Clean and polish kitchen cabinets, kitchen countertops, and vanity tops. Vacuum the inside of all cabinets, as required to remove dirt and debris. Polish all cabinets, vanities, and other stained woodwork and all stainless steel sinks using lemon oil or other polish.
- Clean and shine the inside and outside surfaces of all windows and sliding glass doors.
- Clean and shine all plumbing fixtures and related trim to a sanitary condition. Clean and shine all medicine cabinets, mirrors, and bath accessories.
- Clean and shine all electrical fixtures and trim.
- Clean and shine all appliances. Remove all packing materials, temporary labels, and operating and maintenance manuals. Place in kitchen drawers as directed.
- Clean all wood base, casing, and sills. Clean all wood shelving.
- Clean the outside and inside of all exterior doors, including the threshold. Clean and shine all interior doors.
- Sweep and mop all VCT tile floors. Damp mop all tiles using a shine and conditioner in the mop water.
- Sweep all exterior storage areas, garages, patios and stoops.
- Dust or vacuum walls as needed.
|
